Home & Workshop Accessories AC2-CW5170S / NOT AVAILABLE
Features
- Industrial Subaru OHC/OHV engine (Electric start, without battery and cables)
- 3 year limited engine warranty
Generator Mode
- AC current only
- Selector switch set to idle down - engine will idle down when generator is not in use and tank pressure is 175 PSI
- Switch is set to full throttle - engine will run full throttle continuously
Welder Mode
- DC current only
- Selector switch must be set to full throttle
Compressor Pump
- Quality two stage compressor
- Splash-lubricated cast iron crankcase
- Durable stainless-steel braided discharge hose
- Quality pilot valve unloader
Generator
- Brush-type 2 pole 120V alternator
- Industrial 5000 max watt generator
Welder
- 170A arc welder
- Amperage selection switch
Frame
- Powder coated ASME coded 30-gallon receiver tank
- 3/16-inch base plate to reduce vibration
Components
- Regulator and two gauges for tank and outlet pressure
- Manual drain valves for proper maintenance
Specifications
Model/Part No. | AC2-CW5170S |
Engine | |
Power Source | Gasoline |
Subaru OHC/OHV | 404cc |
Rated Speed | 3,600 RPM |
Compressor | |
CFM @ 100 PSI 16.3 | |
CFM @ 175 PSI 15.7 | |
Generator | |
Max. AC Output | 5000 watts |
Rated AC Output | 4500 watts |
Alternator | |
Cont. On-load @ 100 PSI | 3000 watts |
Cont. On-load @ 150 PSI | 2500 watts |
Frequency | 60 hertz |
Max. Amps (120V) | 41.5 off-load |
Cont. Amps (120V) | 37.5 off-load |
Receptacles | (2) 120V, 20A GFCI duplex; 120V/240V 20A twist lock |
Welder | |
Duty Cycle (10 min. run time) | 150A @ 100% |
DC Voltage | 50-170A working range |
Miscellaneous | |
Measurements | 46"L x 22"W x 47"H |
Net Weight | 585 lbs. |