Wisconsin

Waupun
920-324-3537
W7246 Hwy 68
Waupun, WI 53963

Directions
Beaver Dam
920-887-2728
1749 N Spring St.
Beaver Dam, WI 53916

Directions
Inventory
Parts

John Deere 4045HF485 Industrial Diesel Engine

New / John Deere Products / Engines and Drivetrain / Industrial Diesel Engines / Tier 3/Stage III A / 4045HF485 Industrial Diesel Engine
Model Photo

 

Features

4-valve cylinder head

  • The 4-valve cylinder head provides excellent airflow resulting in greater low-speed torque and better transient response. Cross flow design

High-pressure common-rail (HPCR) and engine control unit (ECU)

  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures, up to 1600 bar (23,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of the injection

Cooled exhaust gas recirculation (EGR)

  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx

Variable geometry turbocharger (VGT)

  • Varies exhaust pressure based on load and speed to insure proper EGR flow; greater low-speed torque, quicker transient response, higher peak torque, and best-in-class fuel economy.

Air-to-air aftercooled

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs

Compact size

  • Horsepower/displacement ratio is best-in-class
  • Lower installed cost
  • Mounting points are the same as Tier 2/Stage II engine models

Engine performance

  • Multiple rated speeds to further reduce noise and improve fuel economy
  • New higher peak torque ratings
  • Better transient response time
  • Greater levels of low speed torque
  • New power bulge feature

John Deere electronic engine controls

  • Electronic engine controls monitor critical engine functions, providing warning and/or shutdown to prevent costly engine repairs and eliminate the need for add-on governing components all lowering total installed costs. Snapshot diagnostic data that can be retrieved using commonly available diagnostic service tools
  • Controls utilize new common wiring interface connector for vehicles or available OEM instrumentation packages; new solid conduit and "T" connectors to reduce wiring stress and provide greater durability and improved appearance
  • Factory-installed, engine mounted ECU or remote-mounted ECU comes with wiring harness and associated components. Industry-standard SAE J1939 interface communicates with other vehicle systems, eliminating redundant sensors and reducing vehicle installed cost

Additional features

  • Glow plugs
  • Gear-driven auxiliary drive
  • Optional 500-hour oil change
  • Self-adjusting ploy-vee fan drive

Emissions Certifications

Less Regulated (Tier 3/Stage lll A equivalent)  

General engine data

Model 4045HF485
Number of cylinders 4
Displacement-- L (cu in) 4.5 (275)
Bore and Stroke-- mm (in) 106 x 127 (4.17 x 5.00)
Compression Ratio 17.0 : 1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 867 (34.1)
Width-- mm (in) 680 (26.8)
Height-- mm (in) 1055 (41.5)
Weight, dry - kg (lb) 491 (1082)

Performance data range

Intermittent - Rated power/Rated speed 111-129 kW (149-173 hp) @2000-2400 rpm
Intermittent - Peak power 116-129 kW (156-173 hp) @1800-2400 rpm
Intermittent - Power bulge 0-4 % @1800 rpm
Intermittent - Peak torque 645 N·m (476 ft-lb) @1500 rpm
Intermittent - Torque rise 22-26%
Heavy Duty - Rated power/Rated speed 115 kW (154 hp) @2400 rpm
Heavy Duty - Peak power 115 kW (154 hp) @2400 rpm
Heavy Duty - Power bulge 0 %
Heavy Duty - Peak torque 575 N·m (424 ft-lb) @1500 rpm
Heavy Duty - Torque rise 26%

Would you like more information?

REQUEST A QUOTE HERE

Free Parts Delivery to
Drop Boxes!

FIND LOCATIONS