Wisconsin

Waupun
920-324-3537
W7246 Hwy 68
Waupun, WI 53963

Directions
Beaver Dam
920-887-2728
1749 N Spring St.
Beaver Dam, WI 53916

Directions
Inventory
Parts

John Deere 400E Loader

New / John Deere Products / Agriculture / Loaders / Front End Loaders For Tractors / 400E Loader
Model Photo

 

Features

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations (400X shown) Pivot point grease fitting locations (400X shown)

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced.  No more searching for grease points that are hard to find.  Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.

Parking stand kit

With the BW15872 parking stand kit, the 300E Loader can be quickly and easily removed from the tractor without tools.

 

Similarly, the BW16127 parking stand kit allows for the 400E Loader to be parked from the tractor.

 

Instructions for attaching the loader

 

Instructions for detaching the loader

 

The kit includes the following:

  • Parking stands
  • Handled pins
  • Hydraulic hoses
  • Quick-couplers
  • Mounting bracket and hardware
Parking stand installed Parking stand installed
Quick disconnect connected Quick disconnect connected
Boom pins installed Boom pins installed

Key Specs

Maximum lift height (A) 2850 mm
112.1 in.
Lift capacity at full height Measured at pivot (U)
1087 kg
2396 lb
Measured at 500 mm ahead of pivot (V)
800 kg
1764 lb
Boom breakout force Measured at pivot (Y)
1743.7 kg
3853 lb
Measured at 500 mm ahead of pivot (Z)
1315.4 kgf
2902 lbf
Bucket rollback force capacity At ground-level line (ZZ)
3485 lb
1580 kg
Clearance at full height - bucket dumped (C) 2298 mm
90.4 in.
Dump angle, degrees (E) 42 degree (angle)
Rollback angle, degrees (G) 28.6 degree (angle)

Tractor

Model 4044M, 4049M, 4052M, 4066M and OOS: 4044R, 4049R, 4052R, 4066R
Front tire 25x10-16.5 4PR R4
Rear tire 16.9-24 4PR
Front axle configuration
Wheelbase 1850 mm
73 in.
Pump capacity 10.2 gpm
Rated pressure 2500 psi

Loader

Base weight 150.99 kg
Leveling configuration
Bucket used Materials
Bucket weight 108 kg
238 lb
Lift capacity at full height Measured at pivot (U)
1087 kg
2396 lb
Measured at 500 mm ahead of pivot (V)
800 kg
1764 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
1307 kg
2881 lb
Measured at 500 mm ahead of pivot (X)
1043 kg
2299 lb
Boom breakout force Measured at pivot (Y)
1743.7 kg
3853 lb
Measured at 500 mm ahead of pivot (Z)
1315.4 kg
2902 lb
Bucket rollback force capacity At maximum height (VV)
1866.1 kg
4112 lb
At 59-in. (1500-mm) lift height (XX)
2355.1 kg
5191 lb
At ground-level line (ZZ)
3487 kg
1580.6 lb
Dimensions Maximum lift height (A)
2850 mm
112.1 in.
At full height - bucket level(B)
2646 mm
104.1 in.
At full height - bucket dumped (C)
2298 mm
90.4 in.
Overall length (I+F), ft (m) 3.522 m
11.5 ft
Overall height in carry position (J) 1.5 m
4.94 ft
Digging depth (H) -146 mm
5.7 in.
Reach At maximum height (D)
705 mm
27.7 in.
At ground level - bucket level (F)
1672 mm
65.8 in.
Bucket angle Dump angle, degrees (E)
42 degree (angle)
Rollback angle, degrees (G)
28.6 degree (angle)
Dump angle, ground
128.2 degree (angle)
Cycle times Loader raise, seconds
4.26 seconds
Loader lower, seconds
3.13 seconds
Bucket dump, seconds
3.14 seconds
Bucket rollback, seconds
2.42 seconds

Additional information

Date collected

Would you like more information?

REQUEST A QUOTE HERE

Free Parts Delivery to
Drop Boxes!

FIND LOCATIONS