Wisconsin

Waupun
920-324-3537
W7246 Hwy 68
Waupun, WI 53963

Directions
Beaver Dam
920-887-2728
1749 N Spring St.
Beaver Dam, WI 53916

Directions
Inventory
Parts

John Deere 320R Loader

New / John Deere Products / Agriculture / Loaders / Front End Loaders For Tractors / 320R Loader
Model Photo

 

Features

Quik-Park™ loader mounting system

Quik-Park loader mounting system Quik-Park loader mounting system

Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

Quick-change attachment carrier

Quick-change attachment carrier Quick-change attachment carrier

Allows fast, easy removal and mounting of attachments without tools.

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Key Specs

Maximum lift height (A) 2616 mm
103.3 in.
Lift capacity at full height Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf
Boom breakout force Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf
Bucket rollback force capacity At ground-level line (ZZ)
1335.4 kgf
2944 lbf
Clearance at full height - bucket dumped (C) 2003 kgf
78.8 lbf
Dump angle, degrees (E) 49.3 degree (angle)
Rollback angle, degrees (G) 23.8 degree (angle)

Tractor

Model 4105
Front tire 10-16.5 6PR R4T1
Rear tire 17.52-24 8PR R4T1
Front axle configuration
Wheelbase 1727 mm
68 in.
Pump capacity 5.7 gpm
Rated pressure 2500 psi

Loader

Base weight 281.09 kg
Leveling configuration
Bucket used Materials
Bucket weight 93.8 kg
207 lb
Lift capacity at full height Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
959 kgf
2109 lbf
Measured at 500 mm ahead of pivot (X)
745 kgf
1639 lbf
Boom breakout force Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf
Bucket rollback force capacity At maximum height (VV)
822 kgf
1819 lbf
At 59-in. (1500-mm) lift height (XX)
1397 kgf
3079 lbf
At ground-level line (ZZ)
1335.4 kgf
2944 lbf
Dimensions Maximum lift height (A)
2616 mm
103.3 in.
At full height - bucket level(B)
2411 mm
94.9 in.
At full height - bucket dumped (C)
2003 mm
78.8 in.
Overall length (I+F), ft (m) 3.218 m
10.55 ft
Overall height in carry position (J)
Digging depth (H) 121 mm
4.76 in.
Reach At maximum height (D)
766 mm
30.1 in.
At ground level - bucket level (F)
1491 mm
50.7 in.
Bucket angle Dump angle, degrees (E)
49.3 degree (angle)
Rollback angle, degrees (G)
23.8 degree (angle)
Dump angle, ground
138 degree (angle)
Cycle times Loader raise, seconds
3.6 seconds
Loader lower, seconds
2.1 seconds
Bucket dump, seconds
3.0 / 1.2 (with regen) seconds
Bucket rollback, seconds
1.8 seconds

Additional information

Date collected

Would you like more information?

REQUEST A QUOTE HERE

Free Parts Delivery to
Drop Boxes!

FIND LOCATIONS