Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
The C-shaped cutterbar profile provides:
Frame allows for uninterrupted crop flow.
The cam real design of the D1500 Series Draper Platform features:
The hourglass-shaped reel has:
Plastic fingers:
Steel fingers:
Optional end fingers improve feeding aggressiveness in difficult feeding and cutting conditions with down and tangled crop.
All 10.7-m (35-ft), 12.2-m (40-ft), and 13.7-m (45-ft) platforms come standard with tine tube stiffener kits to handle heavy crop conditions and improve the life of the platform.
Single span reel:
Double span reel:
The reel is available in five-, six- or nine-bat configurations:
The cutterbar design provides excellent visibility across the full range of tilt:
D1500 Series Draper Platforms offer optional dual gauge wheels with spring suspension:
John Deere D1525, D1530, and D1535 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option.
Hydraulic deck shift option:
Optional left- and right-end swath deflector rods form a space between the windrow and uncut crop to have adequate clearance for the crop divider on the next pass.
Slow-speed transport system:
It is a simple four-step process to switch from field to transport:
PTO speed | 540 rpm |
---|---|
1000 rpm 1-3/8 in. PTO | |
1000 rpm 1-3/4 in. PTO | |
Powerline type | |
Standard hitch | Clevis |
Optional hitch | Equal angle |
Hydraulic pressure required | 13,790 kPa 2,000 psi |
Cutterbar - cutting width | 2.4 m 8.1 ft |
Number of disks/knifes | 5 10 |
Transport width | 2.4 m 8.1 ft |
PTO speed | 540 rpm 1000 rpm |
---|---|
540 rpm PTO | 55-75 hp 41-56 kW |
1000 rpm 1-3/8 in. PTO | |
1000 rpm 1-3/4 in. PTO | |
Powerline type |
Tractor connection | 21 spline |
---|---|
Standard hitch | Clevis |
Optional hitch | Equal angle |
Hydraulic pressure required | 13,790 kPa 2,000 psi |
Hydraulic connections |
Type | John Deere |
---|---|
Cutting width | 2.4 m 8.1 ft |
Cutting height | 2.8-9.8 cm 1.1-3.8 in. |
Number of disks | 5 |
Number of knives | 10 |
Bolted knives | |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h 191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 5.7 L 6 U.S. qt |
Cutterbar oil check | Combination check, drain plug |
Cutterbar angle | |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Suspension system |
Width | 140 cm 55.2 in. |
---|---|
Diameter | 59.4 cm 23.4 in. |
Tines type | V-tines |
Number of tines | 33 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Conditioner hood | |
Wide spread |
Width | |
---|---|
Diameter | |
Type of material | |
Design | |
Speed | |
Drive | |
Windrow width |
Transport width | 2.4 m 8.1 ft |
---|---|
Overall length | |
Transport length | 6.2 m 20.6 ft |
Weight, roll conditioner | |
Weight, impeller conditioner | 2,027 kg 4,470 lb |
Standard tires | 11L-15 standard, 31x13.5L 15 optional 31x13.5L 15 optional |
Are wrenches required for adjusting? |
---|
Date collected | August 24, 2020 |
---|
Would you like more information?
Free Parts Delivery to
Drop Boxes!
© Copyright 2017 - 2024 Ballweg Implement All Rights Reserved. Site by EquipmentLocator.com